Adirondack Chairs 2

Continuing on.

The 18 parts that were rough cut before were then planed. My son helped me. Here they are, still oversize, but ready to shape.


Then I shaped the back slats. I cut them to width, traced the curves, and marked the length. Cut them out on the bandsaw and then sanded to the line. They came out perfectly. Both sets are here, but one set is under the other.


Next we have the arms, front (vertical) legs, and the front cross pieces that hold the sides together.


And here we see (left to right) the decorative supports for under the front of the arms, the inner most seat slats, the lower rear cross pieces, and the angled legs. The angled legs are done in pairs so they are uniform. That takes time and only 1 set is pictured.


Still to finish are the other pair of angled legs, the upper rear cross pieces, and the seat slats. A few more evenings and these will be done.